solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / __ r3s __ screening 3 / __ = not screened tx = tx level txv = txv level s = s level family/voltage 2 = 20v 3 = 30v 4 = 40v 5 = 50v 7 = 70v 10 = 100v 12 = 125v 15 = 150v 20 = 200v 2r3s thru 20r3s 8 amps 20 ? 200 volts 35 nsec hyper fast rectifier features : ? hyper fast recovery: 35nsec maximum ? low forward voltage drop ? low reverse leakage current ? single chip construction ? hermetically sealed package ? metalurgically bonded construction ? tx, txv, and s-level screening available 2 / maximum ratings 2 / symbol value units peak repetitive reverse voltage 2r3s 3r3s 4r3s 5r3s 7r3s 10r3s 12r3s 15r3s 20r3s v rrm v rwm v r 20 30 40 50 70 100 125 150 200 volts average rectified forward current (resistive load, 60 hz sine wave, t a = 25 c) io 8 amps peak surge current (8.3 ms pulse, half sine wave, t a = 25 c) i fsm 200 amps operating & storage temperature t op & t stg -65 to +175 oc maximum total thermal resistance junction to case r jc 1.5 oc/w notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ unless otherwise specified, all maximum ratings/electrical characteristics @25 c. 3/ screened to mil-prf-19500. do-4: note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rc0029d doc
solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 2r3s thru 20r3s electrical characteristics symbol max units instantaneous forward voltage drop (i f =8a, t a =25 oc, 300 sec pulse ) v f 0.90 v dc reverse leakage current (rated v r , t a =25 oc, 300 sec pulse minimum ) i r1 100 a reverse leakage current (rated v r , t a =100 oc, 300 sec pulse minimum ) i r2 2.0 ma reverse recovery time ( t a =25 oc, i f = 0.5a, i r = 1.0a, i rr = 0.25a) t rr 35 nsec typical junction capacitance (v r = 10v dc , t a = 25oc, f = 1mhz) c j 300 pf notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screened to mil-prf-19500. 3/ unless otherwise specified, all maximum ratings/electrical characteristics @25 c. case outline: do-4 stud: cathode lead: anode note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rc0029d doc
|